|
||
 |
||
|
||
|
|
|
|
1-Run Once and self register MidasServer on both client and server ,when needed use tregsrvr.exe to register , BDE with sample databases must be installed before on the server machine also to demonstrate Web Connection IIS shoul be up & running httpsrvr.dll to be copied under Inetpub /scripts directory.For socket connections testing use scktsrvr.exe ,best practice is to run it as service on the server. 2- Full Cbuilder6 source code and exe files available: MidasServer & MidasClient
1-Control Relays etc .connected to LPT1 ,send pulses on defined cycles or directly switch pins of LPT1 Only for Win 98 & 95 Setup File:ParPort.zip 2- Full source code Cbuilder 5 ,Install mLed component before:TocPar.zip
1-For info on BacNet and Building Management Systems: www.bacnet.org 2-To download BacTorch V1clik : BacTorch ,unzip and run setup ,some additional libraries and patches will be installed during setup tested for W98 yet (Unicode problems for NT/2000 hopefully to be coded soon).!.Packet String Parser on going project ! downloads since 25/5/02:
1- Hardware Layout , Microcontroller section Cmcblok.gif 2 Interfacing the slave mode DSP over microwire Cdspblok.gif 3-Full duplex analog circuit and switches Canalog.gif The control program is fairly straightforward , you may ask for more info for the code.First part is the initialization routines and timer interrupt vector checking out for events , (16 machine states) specific events returned through accumulator into a dispatch table resulting in launching of the desired subsection jump. you may use the same logic to control any process via a microcontroller of any type ,must have to analyze how to apply the timer interrupt and the interrupt vector scheme.,drop me an e-mail if you are interested in the code and how to make an application in a short time to market,with many features such as microwire protocol ,keypad scanning routines , LCD panel displaying ,sending controls to DSP etc.....
Short Description: Circuit captures syncronization pulses from SIMPLEX system synchronized by satellite and converts to +/- pulses to drive OMEGA & TISSOT electro-magnetic Public Clocks ,two digit 7 segment display indicates the minute and sync -phase pulse count ,which can be incremented and decremented on behalf of buttons ,additional send pulse button used for advancing the clocks. 1- Hardware Layout : T1_SCH , Prototype : T1_JPG ,final layout T2.jpg 2- Assembly L. Program :tav1.txt and RAM definition file: RAM_INC 3-Final Revision works independently in case no synch signal runs on self crystal full assembly code and coff file : tav3.zip
|
. |
|
Istanbul Turkey |
